Call Now! (888) 980-5725

Technical Documents

Published Papers

The following paper was originally presented at the Asia Turbomachinery & Pump Symposium and is made available on this site by permission of the Turbomachinery Laboratory.

  A Solution to Years of High Vibration Problems in Three Reinjection Compressor Trains Running at 33 MPa Discharge Pressure (2016)
  

The following papers were originally published in "Proceedings of the Turbomachinery Symposium" and are made available on this site by permission of the publisher.

  A Flexible Pad Bearing System for a High Speed Centrifugal Compressor (1992) 

  Application of High Speed and High Performance Fluid Film Bearings in Rotating Machinery (1994) 

  Design, Analysis, and Testing of High Performance Bearings in a High Speed Integrally Geared Compressor (1994)

  Design and Application of Squeeze Film Dampers in Rotating Machinery (1996) 

  Design, Application of High Speed and High Efficiency Hydrogen Turbo Expanders in Refinery Services (1996) 

  Electric Shaft Currents in Turbomachinery (1987) 

  Fluid Film Bearings Fundamentals and Failure Analysis (1991) 

  The Use of Honeycomb Seals in Stabilizing Two Centrifugal Compressors (1993) 

  Using a Damper Seal to Eliminate Subsynchronous Vibrations in Three Back-to-Back Compressors (1995) 

  Vibrations and Eccentricity Measurements Combined with Rotordynamic Analysis on a Six Bearing Turbine Generator (1998)
  

The following paper was originally published in "Proceedings of the International Pump Users Symposium" and is made available on this site by permission of the publisher.

  Experience in the Use of Flexure Pivot Tilt Pad Bearings in Boiler Feedwater Pumps (1998) 
  

The following article was originally published in "Turbomachinery International" and is made available on this site by permission of the publisher.

  Application of Squeeze Film Dampers. The basics of design and use of squeeze film dampers in supercritical turbines (1995)